Rheem* Water Heaters: Everything You Need to Know
Introduction to Rheem Water Heaters
Why Choose Rheem?
Rheem is a well-known and trusted brand in the water heater industry, known for its commitment to quality and innovation. With a history dating back to 1925, Rheem offers a wide range of water heaters designed to meet various needs. Key features include energy efficiency, durability, and advanced technology.
Types of Rheem Water Heaters
Rheem Tankless Water Heaters
Rheem tankless water heaters provide endless hot water on demand, ensuring you never run out. They are energy-efficient and take up less space compared to traditional tank heaters. Popular models include the Rheem RETEX-36 and the Rheem 18kW Tankless Water Heater, both known for their reliability and performance.
Rheem Tank Water Heaters
Rheem offers both gas and electric tank water heaters. Gas models heat water quickly and are cost-effective in the long run, while electric models are easy to install and maintain. Popular models include the Rheem 50 Gallon Gas Water Heater and the Rheem Performance Plus series, known for their efficiency and longevity.
Specialty Rheem Water Heaters
Rheem also provides specialty water heaters, such as hybrid, lowboy, and marathon models. Hybrid models combine heat pump technology with traditional heating methods for maximum efficiency. Lowboy models are designed for installations in tight spaces, and Marathon water heaters are known for their lifetime warranty and durability. Check out our guide for more information about the different types of Rheem water heater models.
Rheem Water Heater Maintenance
Regular Maintenance Tips
Regular maintenance can extend the life of your Rheem water heater. Key tasks include flushing the tank annually to remove sediment buildup, which can affect efficiency and cause damage. Here’s how to flush your Rheem water heater:
1. Turn off the power and water supply.
2. Attach a hose to the drain valve.
3. Open the drain valve and let the water flow out.
4. Close the valve, remove the hose, and refill the tank.
Rheem Water Heater Anode Rods
Anode rods are a crucial component of your water heater, protecting the tank from corrosion. Rheem water heaters typically come with a standard anode rod, but you can upgrade to a powered anode rod for even better protection. Powered anode rods last longer and provide continuous protection against corrosion.
Where is the Rheem Water Heater Anode Rod Located?
The anode rod in your Rheem water heater is located on top of your tank. For most Rheem water heaters, the anode rod is located in a dedicated anode port and can typically be found under a plastic cap and a foam-insulated layer on the top of the tank. It may be necessary to remove this insulation to gain access to the rod.
How to Check and Replace Anode Rods:
1. **Turn off the power and water supply.**
2. **Locate the anode rod on top of the water heater.**
3. **Use a wrench to remove the old anode rod.**
4. **Install the new anode rod, ensuring it is securely in place.**
5. **Restore the power and water supply.**
Regularly checking and replacing the anode rod can significantly extend the life of your Rheem water heater.
Extending the Life of Your Rheem Water Heater
Installing a powered anode rod can significantly extend the life of your Rheem water heater. Anode rods protect the tank from corrosion by attracting corrosive elements. Powered anode rods are more effective and last longer than traditional ones. Follow the manufacturer’s instructions for installation.
Troubleshooting Common Issues
Common Problems and Solutions
Even the best water heaters can experience issues. Here are some common problems and their solutions:
– **Rheem Water Heater Not Heating**: Check the thermostat settings and ensure the power supply is connected.
– **Pilot Light Won’t Light**: Make sure the gas supply is on and the pilot assembly is clean.
– **Reset Button**: If the reset button has tripped, press it to restore function. If it continues to trip, there may be an underlying issue.
– **Plastic Drain Valve Leaking**: Tighten the valve or replace it if necessary.
– **Blue Light Flashing**: This indicates a system error. Refer to the user manual for specific error codes.
How to Troubleshoot Specific Issues
For more specific problems, follow these troubleshooting steps:
– **Pilot Light Won’t Stay Lit**: Ensure the thermocouple is properly connected and free of debris.
– **Beeping**: This usually signals a system error. Refer to the error codes in the user manual.
– **Gas Control or Valve Failure**: Check for gas leaks and ensure the valve is functioning correctly.
Rheem Water Heater Parts and Service
Key Parts to Know
Familiarize yourself with crucial parts of your Rheem water heater, such as the thermostat, temperature settings, and shut-off valve. Knowing these parts can help you troubleshoot and perform minor repairs.
Finding and Replacing Parts
Rheem water heater parts are available at major retailers like Lowes and Home Depot. When replacing parts, ensure they are compatible with your model. Follow the manufacturer’s instructions for installation.
How to Turn On and Reset Your Rheem Water Heater
Step-by-Step Guides
Here’s how to turn on your Rheem water heater:
1. Turn on the water supply.
2. Turn on the gas supply (for gas models).
3. Light the pilot (if applicable).
4. Set the thermostat to the desired temperature.
To reset your Rheem water heater:
1. Turn off the power supply.
2. Press the reset button located on the thermostat.
3. Turn the power back on.
Understanding Rheem Water Heater Warranty
Warranty Overview
Rheem offers various warranties depending on the model. Typically, warranties cover parts and tanks for a certain number of years. Check your user manual for specific warranty information.
To learn more about the Rheem water heater warranty, as well as get more information about their technology and sustainability, check out our Rheem water heater Buyers Guide.
Frequently Asked Questions (FAQs)
Rheem water heaters typically last 8-12 years with proper maintenance.
Check the serial number on the unit. The first four digits typically indicate the month and year of manufacture.
1. Turn off the power and water supply.
2. Attach a hose to the drain valve.
3. Open the valve and let the water drain.
1. Attach a hose to the drain valve.
2. Turn the valve counterclockwise to open.
1. Turn the gas control knob to “Pilot.”
2. Press and hold the reset button while lighting the pilot.
3. Hold for 60 seconds, then release.
1. Turn the gas control knob to “Pilot.”
2. Press and hold the reset button while lighting the pilot.
3. Hold for 60 seconds, then release.
*Rheem is a registered trademark of Rheem Manufacturing Corporation. Corro-Protec is not affiliated with, endorsed by, or sponsored by Rheem Manufacturing Corporation
Blog
Why Does My Well Water Smell Like Rotten Eggs?
Why Does My Well Water Smell Like Rotten Eggs? Hydrogen sulfide gas is often responsible for giving well water a “rotten egg” smell or taste. […]
Suburban* Water Heaters for RVs
Introduction to Suburban Water Heaters When you’re on the road in your RV, having access to hot water isn’t just a luxury—it’s a necessity. Whether […]